2nd
International Symposium on Mechanical Science and Technology (ISMST
2011) Part I
Guangzhou, China, December 20-21, 2011
RESEARCH ARTICLES
Effect
of Slot Geometry on the Impact Response of Square Column
Amir Radzi Ab. Ghani, M. A. Hassan, Zahari Taha, and M. Hamdi
Adv.
Sci. Lett. 13, 1-7 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Micro Incremental Forming of a Herringbone
Pattern for a Rotating Shaft Considering
Elastic Recovery
Jung Han Song, Hye Jin Lee, Sung Jun Park, Jeong Bae
Kim, and Hyoung Wook Lee
Adv. Sci. Lett. 13, 8-14 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Fuzzy Multiple Performance Characteristics
Index Based Optimization in TFTLCD Short Bar
Attach Process
Jian-Long Kuo and Chung-Hao Hsieh
Adv. Sci.
Lett. 13, 15-26 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
An Analytical Study of Spiral Type Shear
Reinforcement Considering Bond Stress
Joo-Hong Chung,
Hyung-Suk Jung, and Chang-Sik Choi
Adv. Sci. Lett. 13,
27-32 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Application of Progressive Molding Process
and Finite Element Method to Fabrication of Titanium Alloy
Sprockets
for Bicycle
Jin-Sung Park, Tae-Il Seo, and Gil-Sang
Yoon
Adv. Sci. Lett. 13, 33-39 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Development of a New Composite Beam Using P.
S. Concrete and Steel
Jeom Han Kim and Young Sang Cho
Adv.
Sci. Lett. 13, 40-45 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Finite Element Analysis of Design Parameters
for High-Performance Hybrid Coupled Shearwall Joint
Baek-Il
Bae, Hyun-Ki Choi, and Chang-Sik Choi
Adv. Sci. Lett. 13,
46-51 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
A Study on the Roll Gap Set-Up to Compensate
for Temperature Drop at the Front-End in
Plate Rolling
Byeong Don Joo, Hong Sup Yim, Jeong Hwan Jang, Jae Hyung Seo,
and Young Hoon Moon
Adv. Sci. Lett. 13, 52-55 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Temperature Control of Solid Oxide Fuel Cell
Using a Reference Model During
Load-Tracking Process
Mao-Hsiung Chiang and Dung-Di Yu
Adv. Sci. Lett. 13,
56-61 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Inter Electrode Gap in Pulse Electrochemical
Process for Local Oxidation of (100) Si Wafer
Jeong
Min Lee and Jeong Woo Park
Adv. Sci. Lett. 13, 62-65
(2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Effect of Gold-Ball Bonding Parameters on
Ball Shear and Wire Pull for Reducing Gold Consumption
Ming-Yi Tsai and Rong-Gui Liu
Adv. Sci. Lett. 13,
66-72 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Application of an Innovative Process
Technology for Phase Shift Mask in Near-Field Phase Shift
Lithography
Hsiang-Yu Hsu, Yung-Jin Weng, Jung-Tang
Huang, and Sen-Yeu Yang
Adv. Sci. Lett. 13, 73-79 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
A Novel Computer Vision System for Color
Classification of Silicon Solar Cells
Hsu-Nan Yen and
Chih-Yi Chiu
Adv. Sci. Lett. 13, 80-83 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Computer-Aided Mobile Robot Control Based on
Visual and Fuzzy Systems
Jih-Gau Juang and Chi-Wen Lo
Adv.
Sci. Lett. 13, 84-89 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
An Analysis of the Relationship Between
Suspension Geometry and Ride Characteristics
Cheng-Chi
Yu and Wei-Feng Hsu
Adv. Sci. Lett. 13, 90-98 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Development and Application Oil Pressure for
On-Line Monitoring Systems of a 161 kV Oil-Filled Cable
Ming-Tang Chen, Sheng-Jen Hsiao, and Yi-Feng Shiu
Adv.
Sci. Lett. 13, 99-104 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Local Damage Evaluation Technique Using
Elasto-Magnetic Sensors Operated on a Cable Climbing Robot
Ju-Won Kim, Jong-Han Lee, Changgil Lee, Seunghee Park,
Dong-Jin Kim, and Jong-Jae Lee
Adv. Sci. Lett. 13, 105-109
(2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Temperature-Compensated Impedance Monitoring
of Steel Girder Connections Using Wireless Sensor Node
Dong-Soo Hong, Duc-Duy Ho, and Jeong-Tae Kim
Adv. Sci.
Lett. 13, 110-114 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Stress Block Parameters for Steel Fiber
Reinforced Reactive Powder Concrete
Baek-il Bae,
Hyun-Ki Choi, and Chang-Sik Choi
Adv. Sci. Lett. 13,
115-119 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Design and Implementation of Performance
Evaluation System for Fluid Hydrodynamic Bearing in HDD
Hyejin Lee, Hyoungwook Lee, Jungwoo Kang, and Sung-Jun Park
Adv.
Sci. Lett. 13, 120-125 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Multi-Step Cure Process for Void-Free
Silicone Resin Encapsulant
Min-Jae Song, Kwon-Hee
Kim, Gil-Sang Yoon, and Heung-Kyu Kim
Adv. Sci. Lett. 13,
126-131 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Hybrid Control System for Compensation of
the Force Ripple in Permanent Magnet Linear Motor
Kyoungchon
Kim, Jungjae Kim, Young-Man Choi, and Daegab Gweon
Adv.
Sci. Lett. 13, 132-136 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
A DMADV Approach to Optimization of
Night-Vision System Assembly
Kuen-Suan Chen,
Ching-Hsin Wang, and Chi-Feng Wu
Adv. Sci. Lett. 13,
137-145 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
The Behavior of High-Strength Square Steel
Tube Columns Filled with Concrete
Hyung-Suk Jung,
Joo-Hong Chung, and Chang-Sik Choi
Adv. Sci. Lett. 13,
146-151 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Development of a Multiscale Machining
Compound Mesoscale Machine Tool (MMT) Platform
Kyungil
Kong, Hyun Myung Kim, Dong Min Kim, and Hyung Wook Park
Adv.
Sci. Lett. 13, 152-157 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
An Application of Lean Design of Structural
Floor System Using Structural Building Information Modeling
(S-BIM)
Seung-Il Lee and Young-Sang Cho
Adv.
Sci. Lett. 13, 158-164 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
A Bi-Directional Magneto-Rheological Brake
for Medical Haptic System: Optimal Design and
Experimental
Investigation
Phuong-Bac Nguyen and Seung-Bok Choi
Adv.
Sci. Lett. 13, 165-172 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Preliminary Design of a Vortex Pool for
Electrical Generation
Sujate Wanchat and Ratchaphon
Suntivarakorn
Adv. Sci. Lett. 13, 173-177 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Stainless Steel Surface Etching Morphologies
Using Electro Plasma Technology
Ah-Der Lin, Chao-Ming
Hsu, Chich-Kuan Chen, Da-Yun Huang, Tsung-Pin Hung, and Jao-Hwa
Kuang
Adv. Sci. Lett. 13, 178-182 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Double Generally Weighted Moving Average
Control Chart for Demerit Statistics
Hae Woon Kang
and Jae Won Baik
Adv. Sci. Lett. 13, 183-188 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
A Study on Electronically Controlled
Continuously Variable Transmission for Motor Scooters
Kei-Lin Kuo
Adv. Sci. Lett. 13, 189-192 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
AFM Based Mechano-Chemical Hybrid Surface
Modification Process on PR-Coated Silicon Wafer
Sun
Ho Kim and Jeong Woo Park
Adv. Sci. Lett. 13, 193-198
(2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Automatic Knowledge Acquisition Tool to
Support Intelligent Manufacturing Systems
Kittisak
Kerdprasop and Nittaya Kerdprasop
Adv. Sci. Lett. 13,
199-202 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Enhancing Interfacial Bond Between PP and
Cement Hydrates
Liang-Hsign Chou, Jhih-Long Tung, and
Maw-Tien Lee
Adv. Sci. Lett. 13, 203-207 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Stereo Vision-Based Early Fire Detection and
Extinguishing System
Chao-Ching Ho and Chun-Wei
Hsiao
Adv. Sci. Lett. 13, 208-212 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
DC Motor Fault Recognition Using
Multi-Resolution Analysis and Neural Network
Po-Hung
Chen, Hung-Chi Lin, and I-Hsiang Tseng
Adv. Sci. Lett. 13,
213-218 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Modelling of Temperature-Dependent Growth
Kinetics of Oxide Scale on Hot-Rolled Steel Strip
Xianglong
Yu, Zhengyi Jiang, Dongbin Wei, Xiaodong Wang, and Quan Yang
Adv.
Sci. Lett. 13, 219-223 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Prediction of Nonlinear Kinematic Hardening
Parameters for DP Steels by Crystal Plasticity-Based
Micromechanical
Analysis
J. H. Kim, M. G. Lee, F. Barlat, and D. Kim
Adv.
Sci. Lett. 13, 224-227 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Electrical Current Representation of
Cemented Soil in Compression Damage Process
Xiao-Qiang
Dong, Xiao-Hong Bai, Yong-Kang Lv, Xin-En Huang, and Jun-Boum Park
Adv.
Sci. Lett. 13, 228-232 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Research on Thermocouple Embedded Position
for Mould Copper Plate with High Casting Speed by FEM Model
Ligen Sun, Huirong Li, and Jiaquan Zhang
Adv. Sci.
Lett. 13, 233-239 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
The Strength and Thermal Stability of
Low-Density Polyethylene Grafted Maleic
Anhydride/Montmorillonite
Nanocomposites
Ming-Kuen Chang, He-Lin Wei, and
Kuan-Shen Wu
Adv. Sci. Lett. 13, 240-244 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
The Development of Tri-Rotor Aerial Vehicle
Jie-Tong Zou and Haw Tso
Adv. Sci. Lett. 13, 245-250
(2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Seismic Performance of Shear Connections in
Fiber-Reinforced Strain-Hardening Cement Composite (SHCC)
Under
Cyclic Loading
K. H. Yun, H. D. Yun, and S. H. Ryu
Adv.
Sci. Lett. 13, 251-256 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Study on Oxidation of Calcium Sulfite in
Dual Alkali Flue Gas Desulfurization System
K. G.
Mbango Mbida, Song Cun Yi, Chang Guan Qin, and Zhang Lidong
Adv.
Sci. Lett. 13, 257-262 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Parametric Simulation of Triple-Pressure
Reheat Combined Cycle: A Case Study
Thamir K. Ibrahim
and M. M. Rahman
Adv. Sci. Lett. 13, 263-268 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Optimal Magnet Pole Design for Cogging
Torque Reduction of Interior Permanent Magnet Synchronous Motor
Using
Response Surface Method
Hung-Cheng Chen
Adv.
Sci. Lett. 13, 269-272 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Deformability of Embedded Stud Connection
Between Reinforced Concrete Wale and Steel Beam
Soo-Yeon
Seo and Seung-Hun Kim
Adv. Sci. Lett. 13, 273-278 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Faults Diagnosis System of DC Motors Based
on Empirical Mode Decomposition Model
Chun-Yao Lee,
Yu-Hua Hsieh, Hung-Chi Lin, and Yi-Xing Shen
Adv. Sci.
Lett. 13, 279-284 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Modelling of 2D Cutting Tool Forces in Micro
Tool Using FEA-ABAQUS
Y. K. Ng, S. F. Shukor, and B.
T. H. T. Baharudin
Adv. Sci. Lett. 13, 285-290 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Influence of Blank Profile on the U-Bending
Micro Drawing Process of Stainless Steel
Tsung-Chia
Chen
Adv. Sci. Lett. 13, 291-299 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Investigation of Machined Surface in
End-Milling Operation of Hastelloy C-2000 Using Uncoated-Carbide
Insert
N. H. Razak, M. M. Rahman, and K. Kadirgama
Adv.
Sci. Lett. 13, 300-305 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Effects of Low Frequency Electromagnetic
Field of Multi-Physical Fields During DC Casting of
7XXX
Aluminum Alloys
Haitao Zhang, Hiromi Nagaumi, and
JianZhong Cui
Adv. Sci. Lett. 13, 306-311 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Microbiologically Influenced Corrosion of
X-70 Carbon Steel by Desulfovibrio Vulgaris
Norhazilan
Md Noor, Nordin Yahaya, Arman Abdullah, Mahmood Md. Tahir, and Lim
Kar Sing
Adv. Sci. Lett. 13, 312-316 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Multidimensional Computational Modeling of
Direct Injection for Hydrogen Fueled Engine
Khalaf
I. Hamada, M. M. Rahman, and A. Rashid A. Aziz
Adv. Sci.
Lett. 13, 317-321 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
A Medical Haptic Master Featuring
Bi-Directional Clutch and Brake Using Electro-Rheological Fluid
Seung-Gu Lim, Jong-Seok Oh, Phuong-Bac Nguyen, and
Seung-Bok Choi
Adv. Sci. Lett. 13, 322-326 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Assessment of High Transparency
Nanocrystalline TiO2 Thin Films and Their
Photocatalytic Removal of
Pollutant Dye
Rachan
Leotphayakkarat, Nitikarn Fangern, M. Paul Gleeson, and Sudjit
Sanguanruang
Adv. Sci. Lett. 13, 327-331 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Dissemination of Production Technology Using
Manufacturing Knowledge Sharing Platform System
Soo
Hyun Son and Sung Min Bae
Adv. Sci. Lett. 13, 332-338
(2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Design of Supervisor for Automated
Manufacturing Systems Using Finite State Automata
Yi-Sheng
Huang, Ho-Shan Chiang, and Kuang-Hsiung Tan
Adv. Sci.
Lett. 13, 339-342 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Chaos Control of New Microelectromechanical
System
Cheng-Hsiung Yang
Adv. Sci. Lett. 13,
343-346 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Study of Human's Motor Control Model Using 2
Degree of Freedom Target Tracing
Joonsik Kim, Jungsu
Kim, and Jaehyo Kim
Adv. Sci. Lett. 13, 347-350 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Optimization of Manufacturing Conditions for
Drum Clutch Hub Using Taguchi Method
Seung-Gyu Kim,
Joon-Hong Park, Seung-Gul Baek, Young-Chul Park
Adv. Sci.
Lett. 13, 351-355 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Realistic Implementation of the Facial
Tracking and the Scenario Interaction on Android Robot
Ching-Kuo Wang
Adv. Sci. Lett. 13, 356-359 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Finite Element Analysis on Vibration of
Nanorods with Heterogeneous Property and Non-Uniform Cross Section
Tai-Ping Chang
Adv. Sci. Lett. 13, 360-363
(2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Seismic Vulnerability Index for Reinforced
Concrete Construction in Algeria
Fatma Imène
Belheouane and Mahmoud Bensaibi
Adv. Sci. Lett. 13,
364-368 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Parameters Calibration and Mode Construction
for Computer Numerical Control Grinding Machine Using FEM
and
Laser Measurement
Jui-Chang Lin, Kingsun Lee, and S.
Y. Lin
Adv. Sci. Lett. 13, 369-372 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Numerical Modeling of Composite Materials
for the Alleviation of Manhole Decrement Into Pavement
Jyh-Dong Lin, Hao-Hsien Chen, Wei-Hsing Huang, Yi-Wei Weng,
Li-Hsu Yeh, and Po-Hsun Sung
Adv. Sci. Lett. 13, 373-376
(2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Magnetic Nanoparticle-Assisted In Vitro
Blood Flow Manipulation and Flow Monitoring with Confocal
Microscopy
Ho Lee and Junghwan Oh
Adv. Sci.
Lett. 13, 377-381 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
On Improving PP Reinforced Cement-Based
Composite
Liang-Hsign Chou and Li-Wen Su
Adv.
Sci. Lett. 13, 382-386 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Optimized Analysis and Mechanical Design of
the Biped Robot with Nontraditional Ultrasonic Motors
Ching-Kuo Wang
Adv. Sci. Lett. 13, 387-391 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
FEM Analysis of Airport Flexible Pavements
Reinforced with Geogrids
Michele Buonsanti and
Giovanni Leonardi
Adv. Sci. Lett. 13, 392-395 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Elastance-Based Mock Circulatory System
Augmented with Gear Pump Controlled Preload
Kwan-Woong
Gwak and Brad E. Paden
Adv. Sci. Lett. 13, 396-399 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Autofluorescence Approaches to Observation
of Mycorrhizal Colonization in Five Orchids
Ming-Chih
Lee, Jung-Huei Hsu, Shu-Fen Cheng, Doris C. N. Chang, Wei-Chiang
Shen, and Yu-Sen Chang
Adv. Sci. Lett. 13, 400-405 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
The Influence of Electromagnetic Propagation
in Nonuniformity Optical Waveguide
Mohammad Syuhaimi,
Foze Ater, and Rahmah Mohammad
Adv. Sci. Lett. 13,
406-409 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Influence of Strain Rate on Tensile Strength
and Deformation Behavior of Nano-Copper Single Crystal
Jen-Ching
Huang
Adv. Sci. Lett. 13, 410-416 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Experimental Performance of Soil Hook System
as an Innovative Soil Anchors in Sand
Hamed Niroumand
and Khairul Anuar Kassim
Adv. Sci. Lett. 13, 417-419
(2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Robust Multi-Criteria Optimal Design for
Improving the Yield of BGA Packaging
Kuang-Hung
Hsien and Shyh-Chour Huang
Adv. Sci. Lett. 13, 420-426
(2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
A Comparative Study of Fuzzy Conditional
Random Fields for Bathroom Activity Recognition
Po-Chuan
Cho, Wen-Hui Chen, and Shen-Ing Liu
Adv. Sci. Lett. 13,
427-430 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Stress Transfer in Single-Walled Carbon
Nanotubes
Shiuh-Chuan Her and Shou-Jan Liu
Adv.
Sci. Lett. 13, 431-435 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Intelligent Position Control of a Variable
Rotational Speed Hydraulic Pump-Controlled System
Mao-Hsiung
Chiang and Bin-Yin Wu
Adv. Sci. Lett. 13, 436-441 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Object Tracking Based on Hardware/Software
Co-Design of Particle Filter
Shih-An Li, Chen-Chien
Hsu, Wen-Ling Lin, and Jui-Pin Wang
Adv. Sci. Lett. 13,
442-446 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Mechanical Property Degradation of Laser
Welded Boron Steel Sheet in Hot Press Forming
Daeyong
Kim, Ji Hoon Kim, M. G. Lee, and Young Il Kim
Adv. Sci.
Lett. 13, 447-450 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Studying on Yield-Surface Rheological Model
of Artificially Frozen Soil Under Unloading States
Dong-Wei
Li, Ju-Hong Fan, and Ren-He Wang
Adv. Sci. Lett. 13,
451-456 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
A Novel Single-Stage Isolated Burn-in Test
Equipment with High Energy Recovery
Li-Chien Huang,
Hong-Chan Chang Cheng-Chien Kuo, and Cheng-Chuan Chen
Adv.
Sci. Lett. 13, 457-462 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
A High Precision Control Based on Learning
Algorithm with Reference Model and Disturbance Observer
Seiji
Hashimoto, Hiroyuki Saitou, and Kenji Nakajima
Adv. Sci.
Lett. 13, 463-467 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
The Field-Dependent Hysteresis and Fatigue
Properties of Electrorheological Fluid: Experimental Results
Sung Hoon Ha, Min-Sang Seong, Jung Woo Shon, Seung-Bok
Choi, and Moon Sik Han
Adv. Sci. Lett. 13, 468-473 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Nanoindentation Stereometry of Wire Bonding
Muhammad Nubli Zulkifli, Azman Jalar, Shahrum Abdullah,
and Norinsan Kamil Othman
Adv. Sci. Lett. 13, 474-477
(2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Curling Effect on Structural Behaviors of
Single Shear Two-Bolted Connections with Austenitic Stainless
Steel
JinSeong Lim and TaeSoo Kim
Adv. Sci.
Lett. 13, 478-481 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Parametric Study of Specific Buckling Load
of Cylindrical Grid Stiffened Composite Shells
Hamid
Shahsavari Alavijeh, Soroush Sadeghnejad, and Mojtaba Sadighi
Adv. Sci. Lett. 13, 482-485 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
A Uniformity Control Chart for Edge
Exclusion Processes
Jae Won Baik and Hae Woon Kang
Adv. Sci. Lett. 13, 486-490 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Ductility and Bond Characteristics of Steel
Fiber-Reinforced Concrete Members Subjected to Shear
Jin-Ha
Hwang, Deuck Hang Lee, Kang Su Kim, Hyun-Do Yun, Soo-Yeon Seo, and
Chang-Geun Cho
Adv. Sci. Lett. 13, 491-494 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Autopilot System for Continuously Variable
Transmission Motorcycles
Yaojung Shiao and Chien-Lin
Chen
Adv. Sci. Lett. 13, 495-500 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Bacterial Adhesion on Optic Waveguide Thin
Film
Hsi-Hsin Chien, Jeremy J. Ramsden, and Yun-Peng
Yeh
Adv. Sci. Lett. 13, 501-504 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Implementation of User Supplied Constitutive
Law for the Analysis of Hyper-Elastic Pipe Flow Using the
Fluid-Structural
Interaction Method
Seungwook Kim, Uisik Hwang, Moon
Hyun Sung, and Seong Wook Cho
Adv. Sci. Lett. 13, 505-508
(2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Derivation of Relation Formula for
Developing Load Cell-Type Anemometer
Dong-Seop Han
Adv. Sci. Lett. 13, 509-513 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Study on Casting Composite Ingot of
4045/3004/4045 Aluminum Alloys
Huixue Jiang, Ke Qin,
and Jianzhong Cui
Adv. Sci. Lett. 13, 514-518 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
The Effects of Different Grades of Hob
Cutter in Determining Gear Tooth Accuracy
M. K. A.
Ariffin, S. Sulaiman, S. H. Tang, M. Rosdi, and S. B. Mohamed
Adv. Sci. Lett. 13, 519-524 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Alteration of Molecular Weight in the Resin
Matrix in Relation to Fade and Wear in a Semi-Metallic Brake Pad
M. A. Sai Balaji, Dr. K. Kalaichelvan, M. Sreenivasan,
and V. Thiyagarajan
Adv. Sci. Lett. 13, 525-533 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Probability Distribution of Arm Trajectory
for Motion Estimation and Gesture Recognition
Khairunizam
Wan, Azri Abdul Aziz, Shahriman Ab, Siti Khadijah Zaaba, Zuwairie
Ibrahim, Zulkifli Md.Yusof, Ismail Ibrahim,
Jameel Abdulla
Ahmed Mukred, and N. Mokhtar
Adv. Sci. Lett. 13, 534-539
(2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Vibration Control of Quarter Vehicle
Magnetorheological Suspension Using Preisach Hysteretic
Compensator
Min-Sang Seong, Seung-Bok Choi, and Yang
Seob Lee
Adv. Sci. Lett. 13, 540-546 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Carbon Nanotubes Reinforced Nanocomposite
Films Characterized by Nanoindentation Technique
Shiuh-Chuan
Her and Ting-Yu Shiu
Adv. Sci. Lett. 13, 547-550 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Isolation and Heterotrophic Growth
Characterization of Freshwater Microalgae
Jun-Hong
Lin, Sheng-Fong Haung, and Kuan-Der Lin
Adv. Sci. Lett.
13, 551-555 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Prediction Technique of Concrete Compressive
Strength Using Ultrasonic Pulse Velocity Method and Spectral
Analysis
of Surface Wave Method
Hong Seong Uk, Jang Hyun Suk,
Back Sang Ki, and Cho Young Sang
Adv. Sci. Lett. 13,
556-559 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Disposable Polymeric Electromagnetic
Actuated Micropump
Pei Song Chee, Rashidah Arsat, U.
Hashim, Ruzairi Abdul Rahim, and Pei Ling Leow
Adv. Sci.
Lett. 13, 560-564 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Design of Briquettizing Machine for Biomass
Briquette Fuel
Chatcharin Sakkampang and Tanakorn
Wongwuttanasatian
Adv. Sci. Lett. 13, 565-569 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Connecting Productivity Index to Shop-Floor
Manageable Indices to Enhance Competitiveness of
Manufacturing
Industry
Soo Hyun Son, Shin Won Seo, Hyoung Wook
Lee, and Sung Min Bae
Adv. Sci. Lett. 13, 570-574 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Mechanical Properties Changes of Nanosilica
Filled Solventborne Polyamide Binder After Accelerated
Weathering
Exposure
Ching Yern Chee, Yun Chen Ching, and
Iskandar Yaacob
Adv. Sci. Lett. 13, 575-578 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Bootstrap-Based Multivariate Control Charts
in Thin Film Transistor Liquid Crystal Display
Manufacturing
Processes
Ji Hoon Kang, Kyu Jong Lee, Jung Hwan Son,
Seog Sang Hyun, Hyoung Kyoon Kim, Gi Don Hwang, and Seoung Bum Kim
Adv. Sci. Lett. 13, 579-583 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Application of Biodegradable Surfactant
Washing to Remediate Total Petroleum Hydrocarbons-Contaminated
Sediments
C. T. Chen, Z. H. Yang, C. W. Chen, C.
D. Dong, and C. M. Kao
Adv. Sci. Lett. 13, 584-587
(2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
The Application of Gray System and Analytic
Hierarchy Process to the Occupational Safety Management of
Construction
Industry
Chen-Hua Wang and Ming-Tsai Hsu
Adv.
Sci. Lett. 13, 588-595 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Surface Properties Comparison Between Al
Films and TiN Films Deposited on Magnesium Alloys by
Magnetron
Sputtering
Yingchuan Chen, Xiangrong Zhu, Naici
Bing, Zhongling Wei, and Qiurong Chen
Adv. Sci. Lett. 13,
596-600 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Research on Developing Automation System to
Remove Line-Stripe on the Roadway
Tai Sik Lee and Eun
Soo Park
Adv. Sci. Lett. 13, 601-605 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Pulse Input Response of Uncooled Laser
Diodes
Mohammad Syuhaimi Ab-Rahman, Mazen Radhe
Hassan, and Khaled Mohamed Shaktur
Adv. Sci. Lett. 13,
606-610 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Improving Energy-Saving System of Building
Heating, Ventilation and Air Conditioning, Water Heating and
Lighting
Wen-Pei Sung, Ting-Yu Chen, Hsien-Jung Wang,
Ben-Li Wang, and Bo-Wei Hsieh
Adv. Sci. Lett. 13, 611-615
(2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Effect of Mechanical Alloying Time and
Ball-Powder Weight Ratio on Synthesis of
MoSi2-Mo5Si3
Nanocomposite
Mohammad Reza Mohammad Shafiee,
Shahrooz Zamani, and Hamid Reza Bakhsheshi Rad
Adv. Sci.
Lett. 13, 616-619 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Experimental Investigation on Locally
Produced Cold-Formed Steel Sections for Roof Truss System
Shek Poi Ngian, Mahmood Md Tahir, Tan Cher Siang, Ahmad
Kueh Beng Hong, and Shahrin Mohammad
Adv. Sci. Lett. 13,
620-623 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Dispersion Polymerized Inorganic Black
Pigment Encapsulation and Its Electrophoretic Response
Sun
Young Hong, Hyung Hoon Sim, and Hyoung-Jin Choi
Adv. Sci.
Lett. 13, 624-627 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Properties of Ni-Co Alloy Coating Prepared
by Pulsed and Pulsed Reverse Current
Lei Liu, Haifeng
Yang, Jingbin Hao, Jiguo Qian, Hua Zhu, and Shirong Ge
Adv.
Sci. Lett. 13, 628-631 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Effect of Micro Pattern and
Octadecyltrichlorosilane Self-Assembled Monolayer on
Nano/Macro-Scale
Friction and Adhesion
Si Si
Liu, Chao Hui Zhang, Han Bing Zhang, Er Yang Ming, and Ming Geng
Adv. Sci. Lett. 13, 632-636 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Angle Control of a Variable Displacement
Hydraulic Motor Using a Self-Tuning Fuzzy-Sliding Mode Controller
Ming-Chang Shih and Kei-Ren Pai
Adv. Sci.
Lett. 13, 637-641 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Formulation and Design of a Pendulum-Type
Tuned Mass Damper System for Mitigation Vibration of a
Ropeway
Carrier
Seung-Hyun Eem, Dong-Doo Jang, Hyung-Jo
Jung, and Seok-Jun Joo
Adv. Sci. Lett. 13, 642-645 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
An Experimental Investigation on
Tribological Characteristics of Magnetorheological Fluids: Wear
and Friction
Wan-Li Song and Seung-Bok Choi
Adv.
Sci. Lett. 13, 646-650 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Using Carbon-Oriented Architecture to Build
Green Cloud
Li-Der Chou and Deng-Yang Huang
Adv.
Sci. Lett. 13, 651-653 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Prediction Simulation Process for
Controlling in Maintenance Time in the Material Department
Nasly Mohamed Ali, Nima Amani, and Abdul Hakim Mohamed
Adv. Sci. Lett. 13, 654-657 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
A Non-Metallic Material Formulation for
Consumable Cartridge Cases
Wenbin Li, Yu Zheng,
Xiaoming Wang, and Weibing Li
Adv. Sci. Lett. 13, 658-663
(2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Efficiency Enhancement of Photovoltaic
Modules Using Optical Grade Epoxy Resin
Hung-Fei Kuo,
Ming-Jong Tsai, Cheng-Yu Peng, Hsien-Wei Ting, Ming-Fu Yang, and
Chao-Hung Cheng
Adv. Sci. Lett. 13, 664-666 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Rolling Element Bearing Fault Diagnosis
Based on Symptom Parameter Wave of Acoustic Emission Signal
Peng Wang, Hongfang Yuan, Huaqing Wang, Xi Cao, and
Xuewei Wang
Adv. Sci. Lett. 13, 667-670 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
The Application of Arc Spraying to the Hard
Facing of Wear-Resistant Multi-Layer Plate
Hung-Shyong
Chen, Jeng-Nan Lee, Chyouhwu Huang, and Huang-Kuang Kung
Adv.
Sci. Lett. 13, 671-674 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Vibration-Based Structural Health Monitoring
of Harbor Caisson Structure Using Auto-Regressive Model
So-Young
Lee, So-Ra Lee, and Jeong-Tae Kim
Adv. Sci. Lett. 13,
675-679 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Sensitivity Analysis of Construction
Processes Using Computer Simulation: A Case Study
Amin
Nikakhtar, Alireza Abbasian Hosseini, and Kuan Yew Wong
Adv.
Sci. Lett. 13, 680-684 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Investigation on Ultimate Strength and
Curling Influence of Channel Four-Bolted Connections in Austenitic
Stainless Steel
Min Seong Kim, Tae Soo Kim, and
Sung Woo Shin
Adv. Sci. Lett. 13, 685-689 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
A New Method of Errors Loaded Tooth Contact
Analysis for Cycloid Bevel Gear
Zhifeng Liu, Zhimin
Zhang, Ligang Cai, Wentong Yang, and Chunhua Guo
Adv.
Sci. Lett. 13, 690-696 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Implementation of Lean Model for Carrying
Out Value Stream Mapping in the Aerospace Engine Case Production
Chen-hua Wang, Jar-Her Kao, and Ming-Tsai Hsu
Adv.
Sci. Lett. 13, 697-701 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Development of an Adequate Online Tool Wear
Monitoring System in Turning Process Using Low Cost Sensor
Jaharah A. Ghani, Muhammad Rizal, Mohd Zaki Nuawi, and
Che Hassan Che Haron
Adv. Sci. Lett. 13, 702-706 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Stress Concentration Factor Estimation for
Composite Plates with Cuts Using Guided Waves
Han-Sam
Yoon, Jinho Woo, and Won-Bae Na
Adv. Sci. Lett. 13,
707-711 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Evaluation of Mechanical Properties for
Jute/Bamboo Hybrid Composite
Yun-Hae Kim, Chan-Yeob
Park, Seon-Young Kang, Hee-Beom An, Sung-Won Yoon, and Hyeung-Sik
Choi
Adv. Sci. Lett. 13, 712-715 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Delamination Behavior of Interlaminar
Short-Fiber Reinforced Composite Laminates Under Low-Velocity
Impact
Fengpeng Zhang, Zhaoguo Qiu, Jun Liu, and Yu
Zhan
Adv. Sci. Lett. 13, 716-719 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
The Application of Convergent Multi-Image
Correlation in Determining Displacements in Beams
Mushairry
Mustaffar, Rozana Zakaria, Radzuan Sa'ari, Zaiton Haron, and Md.
Rajuna Ahmad Shakri
Adv. Sci. Lett. 13, 720-722 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Nonlinear Finite Element Analysis of Spar
Platform
A. B. M. Mohammed Jameel, Saiful Islam, M.
Khaleel, and Mohd Zamin Jumaat
Adv. Sci. Lett. 13,
723-726 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Influence of CSA Expansive Admixture on
Mechanical Properties of Strain-Hardening Cement-Based Composite
(SHCC)
Young-Jae Song, Sung-Ho Kim, June-Su Kim,
Hyun-Do Yun, Mark Tera, and Mickey Shin
Adv. Sci. Lett.
13, 727-731 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
A Binary Particle Swarm Optimization
Approach to Optimize Assembly Sequence Planning
Jameel
A. A. Mukred, Zuwairie Ibrahim, Ismail Ibrahim, Asrul Adam,
Khairunizam Wan, Zulkifli Md. Yusof, and N. Mokhtar
Adv.
Sci. Lett. 13, 732-738 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Research on the Factors of the Abnormal Wear
of Shearer' Pick Holder
Kui-Dong Gao, Chang-Long Du,
Song-Yong Liu, and Lin Fu
Adv. Sci. Lett. 13, 739-743
(2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Analysis of Multi-Objective Planning Dynamic
Equilibrium by K-Means of Proportional Distribution for
Multi-Objective
Particle Swarm Optimization
Shen-Tsu Wang, Jen-Yin
Yeh, Wen-Tsann Lin, and Meng-Hua Li
Adv. Sci. Lett. 13,
744-747 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Fracture Analysis of Interfacial Crack
Between Two Composite Materials
Shiuh-Chuan Her
Adv. Sci. Lett. 13, 748-753 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Application of Block Method for Solving
Nonlinear Two Point Boundary Value Problem
Zanariah
Abdul Majid, Pei See Phang, and Mohamed Suleiman
Adv.
Sci. Lett. 13, 754-757 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
The Indoor Air Purification by New
Photocatalytic Reactor
Chih-Ming Ma, Gui-Bing Hong,
Sih-Yu Liou, and Chang-Tang Chang
Adv. Sci. Lett. 13,
758-761 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Using Sugarcane Bagasse Ash as Partial
Cement Replacement in Cement-Based Composites
Wei-Ting
Lin, Hsin-Lung Ho, An Cheng, Ran Huang, and Chin-Cheng Huang
Adv. Sci. Lett. 13, 762-767 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
A Prototype to Recognise the Drawing
Elements in Construction Drawings Using Artificial Intelligence
Chitrakala Muthuveerappan, Abdul Hakim Muhammad, Muhd
Zaimi Abd Majid, and Anil Minhans
Adv. Sci. Lett. 13,
768-769 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Constructing an Outsourcing Model to
Evaluate the Health Information System
Yuan-Huei
Huang and Che-Wei Chang
Adv. Sci. Lett. 13, 770-773
(2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
To Explore the Social Psychological Factors
Influencing Outcomes of Health Websites
Hsu-Hua Lee,
Tsau-Tang Yang, and Chung-Hung Tsai
Adv. Sci. Lett. 13,
774-779 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Study on Microstructure and Mechanical
Properties of Welding Coarse Grain Heat-Affected Zone of
High-Nb
X80 Steels
Xiao-Wei Chen, Gui-Ying Qiao, Xu Wang,
Fu-Ren Xiao, and Bo Liao
Adv. Sci. Lett. 13, 780-783
(2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Applying Reflectance Spectrum to Evaluate
Water Content in Pachira Macrocarpa
Yung-Liang
Peng and Yu-Sen Chang
Adv. Sci. Lett. 13, 784-786 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Characteristics and Release Behavior of
Microencapsulated Cinnamon Oil by -Cyclodextrin
and Chitosan
Yage Xing, Qinglian Xu, Liang Zhang,
Zhenming Che, Xihong Li, Yu Rao, Yumin Bai, and Ke Li
Adv.
Sci. Lett. 13, 787-790 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Voltage Collapse Detection of a Power System
Based on Fault Identification Filtering Design
Sendren
Sheng-Dong Xu, Yew-Wen Liang, and Hung-Yi Liu
Adv. Sci.
Lett. 13, 791-796 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Structure Design and Modal Analysis of a
Novel Plate Piezoelectric Motor
Shann-Chyi Mou
Adv. Sci. Lett. 13, 797-803 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Self-Energized MHD Pumps for Spacecraft Heat
Transport
Renuganth Varatharajoo, Ralph Kahle, and
Stefanos Fasoulas
Adv. Sci. Lett. 13, 804-806 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Recovery as Environment-Friendly Cement from
Paper Pulp Waste Through Plasma Gasification Processes
Jai-Houng
Leu
Adv. Sci. Lett. 13, 807-810 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
The Bullwhip Effects in Industrialized
Building System Supply Chains
R. Taherkhani, Mohammad
Ali Nekooie, A. L. Saleh, Mohamad Ibrahim Mohamad, Shaiful Amri
Mansur, Mehdi Nourbakhsh,
and Samaneh Zolfaghaarian
Adv.
Sci. Lett. 13, 811-812 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
A Risk-Based Project Schedule Estimation
Method to Improve Project Reliability
Shiva
Mansoorzadeh, Sha'ri Mohd Yusof, Hossein Zeynal, and Shahriar
Mansoorzadeh
Adv. Sci. Lett. 13, 813-816 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
A Study of Application of Axiomatic Design
Theory on Effort-Saving Bicycle
Feng-Tsai Weng and
Shien-Ming Jenq
Adv. Sci. Lett. 13, 817-819 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Inductively Coupled Plasma Mass
Spectrometric Determination of Heavy Metals in Cultivated Soils
and
Zingiberaceous Plants
Chutima Limmatvapirat,
Juree Charoenteeraboon, and Thawatchai Phaechamud
Adv.
Sci. Lett. 13, 820-822 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
The Causal Relationship Analysis on the
Green Building System Assessment Dimensions
Ah-Taur
Yan, Mei-Jung Lai, and Chiu-Yue Lin
Adv. Sci. Lett. 13,
823-826 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Decision Making Framework for Earthquake
Resistant Building
Azlan Adnan, Rozana Zakaria, Choo
Kok Wah, Abd. Latif B. Saleh, Khairulzan B. Yahya, Mushairry
Mustaffar, and
Md. Rajuna Ahmad Shakri
Adv. Sci.
Lett. 13, 827-830 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Electron Beam Welding Varestraint Test of
ALLVAC 718 PlusTM for Aviation Technology
Sinem
Uzgur, Huijun Li, M. Cemal Kushan, Ma Yan, Yagiz Uzunonat, and
Fehmi Diltemiz
Adv. Sci. Lett. 13, 831-832 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Mixed Convection Boundary Layer with
Internal Heat Generation in a Porous Medium Filled with a
Nanofluid
Mohd Hafizi Mat Yasin, Norihan Md Arifin,
Roslinda Nazar, Fudziah Ismail, and Ioan Pop
Adv. Sci.
Lett. 13, 833-835 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
The Correlation Between Shade Tolerance and
Leaf Characteristics of Ten Urban Landscape Plants
Chun-Wei
Wu, Yu-Sen Chang, Ming-Chih Lee, Fu-Hua Sung, I-Ching Huang, and
Jung-Huei Hsu
Adv. Sci. Lett. 13, 836-840 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Photocatalytic Degradation of Methylene Blue
Dye in Aqueous Solutions by Photocatalytic Oxidation
SiO2-TiO2
Angélica López Rodríguez, Pio
Sifuentes Gallardo, Miguel Ángel Hernández Rivera,
Fabian Rivera Trejo,
Laura Lorena Díaz Flores, and María
Guadalupe Garnica Romo
Adv. Sci. Lett. 13, 841-843
(2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Engineering Properties of Controlled
Low-Strength Materials Containing Waste Glass from Solar Panels
An Cheng, Kae-Long Lin, and Guo-Kai Liao
Adv.
Sci. Lett. 13, 844-847 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Motion Control of a Nonlinear Pneumatic
Actuating Table Using Self-Adaptation Fuzzy Controller
Shiuh-Jer
Huang and Shin-Wei Shieh
Adv. Sci. Lett. 13, 848-852
(2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
A Comparison Study on Different Toolpath
Strategy in Pocket Milling of AISI 420 Stainless Steel
M.
S. M. Mokhtar, B. T. H. T. Baharudin, N. Ismail, and Z. Leman
Adv. Sci. Lett. 13, 853-857 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
The Influence of Physical Properties on
Total Friction Factor in Horizontal Dilute Pneumatic Conveying of
Plastic Particles
Rungtawan Wiwattanasirikul
and Purimpat Sujumnongtokul
Adv. Sci. Lett. 13, 858-862
(2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Control Chart Pattern Recognition of
Manufacturing Process Using Wavelet Feature-Based Artificial
Neural
Networks
Jun Seok Kim, Sang-Hoon Park, Cheong-Sool
Park, Hyo-Heon Ko, Sung-Shick Kim, and Jun-Geol Baek
Adv.
Sci. Lett. 13, 863-866 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Study of Extraction Process of Polyphenol
from Old Leaves of Toona Sinensis
Guo-li Gong, Song
Chen, Qiao Zeng, Nan Li, and Wenjuan Yang
Adv. Sci. Lett.
13, 867-871 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Steam Reforming of Liquid Wastes from
Biomass Using Tubular Alumina Supported Pd Membrane Catalyst
Jurarat Nisamaneenate, Duangduen Atong, and Viboon
Sricharoenchaikul
Adv. Sci. Lett. 13, 872-876 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Pervious Concrete Texture Analysis for
Infiltration Rate Evaluation
Morteza Firouzi, Supiah
Shamsudin, Mohammad Ali Nekooie, Abdul Jamil Bin Abd. Rahis, R.
Taherkhani, and
Mohamad Ibrahim Mohamad
Adv. Sci.
Lett. 13, 877-878 (2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]
Applying Spine-Type Prism to Improve Three
Dimensional Dynamic Digital Image Techniques
Wen-Pei
Sung and Ming-Hsiang Shih
Adv. Sci. Lett. 13, 879-883
(2012)
[Abstract]
[Full
Text - PDF] [Purchase
Article]